Remington 870 Tac-14 12 gauge Shockwave 14” Pistol Grip Shotgun -- R81230

SHOCKWAVE RAPTOR PISTOL GRIP

MAGPUL M-LOK FORE-END

14" CYLINDER BORE BARREL WITH BEAD SIGHT, BLACK OXIDE FINISH

4+1 CAPACITY

Classified as an "OTHER FIREARM"

Item No: R81230

UPC 810070682972

A layaway plan is also available.

OUT OF STOCK -- CONTACT US FOR DETAILS ABOUT OUR WAIT LIST

ATI Omni Hybrid AR-15 .410 Semi-Auto Shotgun ATIGOMNI41LTD

Built on their patented Omni Hybrid receiver, the Omni Hybrid 410 is a one of a kind shotgun wonder. Chambered for 2 1/2" .410ga shells, the Omni Hybri 410 is a must have multi-purpose shotgun.

Featuring an 18.5" barrel with a custom 13" keymod rail, the Omni Hybrid 410 runs on a gas operated, short stroke balanced piston system.

Each Omni Hybrid 410 comes with one 5 round American Tactical made polymer magazine. Additional 5 round magazines and 15 round magazines are usually available for separate purchase. The Omni Hybrid 410 will only operate with the patent pending American Tactical polymer 410 magazine.

Every Omni Hybrid 410 is built on their patented Omni Hybrid lower receiver and can be converted to 5.56 or 300blk just by changing the upper receiver! Every Omni Hybrid 410 upper receiver is built to regular AR spec and can be installed on most mil-spec lower receivers!

Weight: 6.5lbs
BBL: 18.5"
Stock: M4
Rail: 13'' custom keymod
Mag: 5 round capacity

Assembled in Summerville, SC by American Tactical!

IMPORTANT:
The Omni Hybrid 410 shoutgun only works with 2 1/2" shotgun shells. Some manufacturers 2 1/2" shells are actually longer than 2 1/2" and may not operate in this gun. Please check the length of your 2 1/2" shells prior to attempting to fire them. The Omni Hybrid 410 shotgun only fires 410 ga cartridges. Do not attempt to fire other calibers of ammunition through this firearm. Other cartridges such as 45LC or 45-70 will not operate with this firearm and may cause damage to the shotgun and harm to the operator if attempted.

UPC 813393019951

OUT OF STOCK -- CONTACT US FOR DETAILS ABOUT OUR WAIT LIST

Mossberg 590M Shockwave 12 gauge Pump Shotgun -- 50208

Per Mossberg: The Shockwave includes all the features that have made Mossberg pump-actions the choice for millions worldwide: ambidextrous safety, dual extractors, positive steel-to-steel lockup, twin action bars, and a smooth operating anti-jam elevator.

It has a convenient clean-out tube magazine cap, a front bead sight, and 'corn cob' strapped forend to keep shooter's lead hand clear of the muzzle.

The 590 Shockwave Raptor bird's head pistol grip is uniquely shaped to minimize felt recoil.

Classified as fully-compliant by the BATFE, this model has a 26.37" OAL and requires no Tax Stamp for transfers. This model is mag fed.

FEATURES & SPECS:

• Capacity: 10+1
• Weight: 6.5 lbs
• Chamber: 2.75”
• Stock: Synthetic Fixed Raptor Birdshead Grip
• Sights: Bead
• Safety: Manual thumb
• Heavy-Walled barrel
• 15” barrel

Part No. 50208

UPC 015813502085

Brand New in the Factory Box American Tactical ATI Milsport Ltd AR-15 Optics Ready Rifle

In stock and ready to ship right away!

Forged aluminum lower receiver (not polymer) Flattop Optics Ready Carbine

Includes one 30 round polymer magazine with orange follower

Adjustable 6 position stock

M4 profile 16" barrel with 1:8 twist and Railed Gas Block

Model ATIG15MS556LTD

New in the box Rock River Arms RRAGE 3G AR-15 Rifle – Model DS1700

16” Chrome Moly Barrel threaded ½ x 28

15 INCH RRAGE 3G FREE FLOAT RAIL HANDGUARD, M-LOK® COMPATIBLE

5.56MM NATO chamber for 5.56mm and .223 caliber

6 Position Adjustable Stock

Carbine length gas system, with low profile gas block

Forged lower receiver

Includes one RRA 30 ROUND POLYMER MAGAZINE, MANUAL, AND WARRANTY INFORMATION

A2 Flashider

Model No. DS1700

A layaway plan is also available.

New in the Box Mossberg 590 Shockwave 12 Gauge Pump with CTC Laser Saddle Raptor Grip – Model 50638

14.375” Barrel

Bead/Crimson Trace Laser Saddle Sights

Raptor Grip/Corncob Fore-end with strap

3” Chamber size -- shotgun shells

5 round capacity

Synthetic Stock

Swivel Studs

Model No. 50638

UPC 015813506380

A layaway plan is also available.

OUT OF STOCK -- CONTACT US FOR DETAILS ABOUT OUR WAIT LIST

Brand new in the box Anderson Manufacturing AM-15 Rifle
Comes with 1 30 round aluminum magazine

Anderson Manufacturing in Hebron, Kentucky, manufactures all their parts, so they are able to offer Affordable, American Made, Quality for Less! The EXT Carbine Rifle is a high quality rifle for a low cost. Just add an optic of your choice and you are ready to take on range day!

This Rifle is assembled with the highest quality Anderson Manufacturing machined parts. Built by Anderson Manufacturing Armorers with the following parts: AM-15 Stripped Lower Receiver; Magpul Lower Parts Kit - Stainless Steel; AM-15 Buttstock - Magpul MOE; AM-15 Buffer Tube, 6 Position - Carbine Length; AM-15 Buffer Tube Castle Nut; AM-15 Buffer, Carbine Length; AM-15 Buffer Spring - Carbine Length; AM-15 Receiver End Plate - Ambi; .223 16" Barrel - Carbine Length; AM-15 Stripped Upper Receiver; AM-15 Bold Carrier Group, 5.56; AM-15 Charging Handle - Standard; AM-15 Gas Block, Low Profile - .750; AM-15 Gas Tube - Carbine Length; Flash Hider, Knight Stalker - 5.56/.223; AM-15 Upper Parts Kit; AM-15 Free Float Kit, EXT - 9".

The EXT Carbine Length Free Float Kit provides ultimate strength and durability while also providing comfort and functionality. The Length of this free float is 9.4" Featuring continuous top picatinny rail and bottom and sides designed to accept picatinny rails. Also featuring integral sling swivel attachment points. Made from 6061-T6 Aluminum, and finished to Mil Spec with type III Hard Coat Anodizing. Steel barrel nut (1¼"-18 thread), 3 allen head bolts, and two quick disconnects for forearm.

The AM-15 Lower Receiver is American made with superior quality for less! CNC machined from a high-strength, 7075 T6 aluminum forging for reliable performance and outstanding durability. Machined to Military Specifications & Standards and marked "Multi-Cal " to be used with multiple calibers on the AR-15 platform. This Lower Receiver comes in type III black hard anodize, and an Open Trigger.

The Magpul Lower Parts Kit for AM-15 includes the following: Bolt Catch (1), Bolt Catch Plunger (1), Bolt Catch Roll Pin (1), Bolt Catch Spring (1), Buffer Retainer (1), Buffer Retainer Spring (1), Magazine Catch (1), Magazine Catch Button (1), Magazine Catch Spring (1), Pivot Pin (1), Pivot/Takedown Pin Detent (2), Pivot/Takedown Pin Detent Spring (2), Safety Selector (1), Safety Selector Detent (1), Safety Selector Detent Spring (1), Takedown Pin (1), Trigger Guard (1), Trigger Guard Roll Pin (1), Magpul MOE Pistol Grip (1), Pistol Grip Lock Washer (1), Pistol Grip Screw (1), Stainless Steel Trigger (1), Stainless Steel Hammer (1), Trigger/Hammer Pins (2)Disconnect (1), Disconnect Spring (1), Trigger Spring (1), Hammer Spring (1).

The MOE Stock - Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

The 6 Position Buffer Tube is Finished in Black Anodize, and made from 7075 T6 Aluminum. The buffer tube castle nut is the standard AR-15 buffer tube nut. The Carbine Length, Standard Buffer & Music Wire Type Buffer Spring. The Am-15 Mil Spec, Ambidextrous Receiver End Plate has two Sling Holes and comes with a Parkerized Finish.

The Upper Receiver is machined from 7075 T6 Aluminum forging. Featuring M4 feed ramps, this upper receiver is machined to Military Specifications & Standards and can be used with multiple calibers on the AR-15 platform. This upper receiver comes in type III hard coat black anodize.

The 16" 5.56 M4 barrel is made from 4150 Chrome Moly Vanadium Steel with a Parkerized finish. Featuring a carbine length gas system with a .750" gas port and a 1:8 twist, this barrel provides top accuracy and precision for your rifle.

The Knight Stalker Flash Hider reduces barrel rise for fast accurate follow up shots, and significantly cuts flash down for fast target acquisition.

The AM-15 Bolt Carrier Group - .223 Complete Bolt and Carrier Group is Phosphate coated and Chrome Lined. The Carrier is made from 8620 steel, and the Bolt is made from 9310 steel and Phosphate coated, MPI Tested. The 223 Bolt and Bolt Carrier Assembly comes complete with Cam Pin, Firing Pin and Firing Pin Retainer.

The AM-15 Charging handle is the standard AR-15 charging handle.

The AM-15 Low Profile Gas Block Assembly is intended to fit underneath free floats. This Gas Block is made from 6061 T6 aluminum and is compatible with a .750 dia Barrel. The gas block is paired with an AM-15 Carbine Length Gas Tube with a length of 9.75", and is made from 304 Stainless Steel.

Item No. B2-K855-A001

UPC 784672476881

Ruger Harrier AR-15 5.56 Semi-automatic Rifle – LayAway Option – Model 28600

Per Ruger: The Harrier tactical rifle features:

• Magpul MOE K2 grip;
• DT Carbine collapsible buttstock on a Mil-Spec buffer tube;
• Picatinny rail at front and rear;
• QD sling sockets;
• M-LOK handguard with full piucatinny rail;
• threaded, Government profile 16" barrel with 1:8 twist;
• forward assist;
• dust cover;
• brass deflector;
• GI single stage trigger;
• charging handle.
• Includes A2 flash hider and one 30rd Magpul PMAG magazine.

Item No: 28600

UPC 736676286003

A layaway plan is also available. Please email us for details

OUT OF STOCK -- CONTACT US FOR DETAILS ABOUT OUR WAIT LIST

Brand new in the box Mossberg MMR Carbine AR-15 with all the factory included accessories. Item # G65074

Includes a 13" picatinny top rail free floating handguard with M-LOK slots, with rail mounted front and rear adjustable sights

Mapgul MOE+ Grip

Winter Trigger Guard

16.25" A2 style barrel with 1:8 twist and M-4 style cutout -- chambered in 5.56 NATO so it will shoot either 5.56 of .223 Remington

A2 style muzzlebrake

Adjustable 6 position buttstock

Comes with 1 30 round magazine

UPC 015813650748

OUT OF STOCK

Brand new in the box Ruger AR-556 AR-15 Rifle -- Ruger 8500 -- with trigger lock

16" 1:8 Twist Cold Hammer-Forged Barrel; Caliber 5.56 NATO/.223 Remington

Six-position telescoping M4-style buttstock and Mil-Spec buffer tube allow the rifle to be properly sized for different shooters, or varying levels of outerwear or defensive gear.

Medium contour cold hammer-forged barrel with ultra-precise rifling provides exceptional accuracy, longevity and easy cleaning. The 1:8" twist rate stabilizes bullets from 35 to 77 grains, and the 5.56 NATO chamber allows the use of both 5.56 NATO and .223 Rem. Ammunition. M4 feed ramps provide improved operational reliability, and the matte black oxide finish reduces glare and provides corrosion resistance. A Ruger® flash suppressor is provided, and the 1/2"-28 threaded barrel allows for standard muzzle accessories to be installed.

Front sight post is elevation adjustable, and a front sight tool is included. The A2-style F-height allows co-witness with many optics.

Chrome-plated bolt carrier inside diameter and chrome-plated gas key inside diameter provide exceptional resistance to hot gases. The gas key is staked so that it will not loosen after extensive firing. A matte black oxide finish on the exterior of the bolt carrier provides corrosion resistance

Single-stage trigger provides durable and reliable fire control. The enlarged trigger guard is designed to allow gloved shooting.

Handguards are made from heat-resistant glass-filled nylon for shooting comfort and durability.

Ergonomic pistol grip features an extended trigger reach for more precise trigger control.

Made from aerospace-grade 7075-T6 aluminum forging, the flattop upper receiver includes a forward assist, dust cover and brass deflector, and is Type III hard coat anodized for maximum durability.

Bolt is machined from 9310 alloy steel and is shot peened and pressure (proof) tested to ensure strength, structural integrity and durability

Patent pending Barrel Nut and Delta Ring are designed for one person handguard removal and installation. The design accepts most standard carbine length handguards. The barrel nut uses a standard wrench and can be swapped with a Mil-Spec barrel nut if desired.

Milled gas block is located at a carbine-length (M4) position for improved balance and handling. Multiple attachment points include a QD socket and bayonet lug, for many sling and accessory mounting options. Serrations on the angled face of the gas block provide a low-glare surface.

Comes with 1 30 round Magpul PMAG magazine

Ruger® Rapid Deploy folding rear sight provides windage adjustability, and pairs with the elevation adjustable front sight for a solid, reliable aiming system. The rear sight can be folded out of the way to make room for optics, but can be instantly redeployed if needed.

It also has a bolt machined from 9310 alloy steel, single-stage trigger, chrome-plated bolt carrier with a matte black oxide finish on the exterior, and patent pending barrel nut and Delta ring for one person handguard removal and installation

UPC 736676085002